Gas Cylinder Supports
Grainger Calibration Gas 116L 3-Gas Mix
The GASCO Calibration Gas - Air is a calibration gas cylinder containing air for calibrating gas detection instruments. This 16 liter aluminum cylinder contains 99.9995% pure air certified to NIST traceable standards. The cylinder has a CGA-590 outlet with a brass valve and is refillable. This calibration gas is suitable for calibrating and bump testing gas detectors used for monitoring oxygen levels. With a 2 year shelf life, this cylinder from GASCO provides high purity air from a reliable supplier. The 16N027 model contains 16 liters of gas at a pressure of 1800 psi.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N028 is a 1/2 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1.125" shaft diameter and 1.937" shaft height. The motor operates on 115V power with a service factor of 1.15 and includes thermal overload protection. Some key features are the cast iron construction, ball bearings for smooth operation, and durable powder coat paint finish. With a totally enclosed fan cooled (TEFC) design, it is well suited for industrial applications requiring a rugged, dependable 1/2 HP electric motor.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger Calibration Gas 116L 3-Gas Mix is a 116 liter cylinder of calibration gas used for gas detector calibration and bump testing. It contains a precise mixture of 3 gases: 25% LEL Methane, 18% Oxygen, and 60 ppm Carbon Monoxide. This disposable cylinder has a CGA-580 outlet connection and comes equipped with a handwheel valve and protective cap. The shelf life is 18 months from the date of manufacture. This calibration gas is suitable for calibrating and bump testing many different gas detectors including combustible gas, O2 deficiency, and CO sensors.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N018 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction with non-scratching fibers for cleaning and scouring. It has a 6 inch by 9 inch size and comes in a pack of 10 pads. The pads have a medium duty abrasiveness that is suitable for cleaning pots, pans, dishes, counters, appliances, tools, and more. The open web design allows dirt and grime to collect in the pad for more effective scrubbing. It can be used for hand scrubbing or attaching to a handle. This pack of 10 general purpose hand pads from 3M provides an economical option for a variety of cleaning tasks.
Grainger Calibration Gas 116L 3-Gas Mix
The Grainger 16N062 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a 1.15 service factor, thermally protected, manual reset overload protector, and meets NEMA design B standards. This motor can be used for various industrial applications requiring 3/4 HP.
Strem, An Ascensus Company 1cyl. Swagelok Cylinder Assembly, 50ml with 1/4" VCR Male Bellows-Sealed Valve (High Temp) and Female Nut for CVD/ALD.
1cyl. Swagelok Cylinder Assembly, 50ml with 1/4" VCR Male Bellows-Sealed Valve (High Temp) and Female Nut for CVD/ALD. Strem# 96-1071. http://www.strem.com/catalog/v/96-1071/
Strem, An Ascensus Company 1cyl. Swagelok Cylinder Assembly, 50ml with 1/4" VCR Male Ball Valve and Female Nut for CVD/ALD.
1cyl. Swagelok Cylinder Assembly, 50ml with 1/4" VCR Male Ball Valve and Female Nut for CVD/ALD Strem# 96-1070. http://www.strem.com/catalog/v/96-1070/
Grainger Calibration Gas 116L R12 Nitrogen
The GASCO Calibration Gas - Nitrogen is a high purity nitrogen gas used for calibration and testing of gas detection equipment. It comes in a 103L cylinder with 99.998% nitrogen. The cylinder has a CGA 580 outlet connection and is rated for pressures up to 3000 psig. This calibration gas meets standards set by the National Institute of Standards and Technology for use in calibration and bump testing gas detectors. The cylinder should be stored and used in accordance with safety regulations for compressed gas cylinders. This is a high quality nitrogen gas for reliable calibration of gas detection systems.